1. The engine of Furidi is a domestic engine. The Furidi, which participated in the C-NCAP test, was officially launched in June 2009. The Furidi is equipped with front dual airbags and ISOFXI devices. The front seat belts have pre-tightening and force-limiting functions, and the driver's seat is equipped with Fully equipped with a reminder device.
2. It is not considered imported. It's 6Y shackles. It is much more powerful than the ordinary 6 naturally aspirated. It also saves fuel.
3. Kia FordDi is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
4. Hello, this is a domestic engine. I wish you a pleasant drive.
1. Fredi provides two engine options. Among them, the maximum power of the 5L naturally aspirated engine is 82 kW, and the maximum torque is 148 N·m, which is matched with a 5-speed manual or 4-speed automatic transmission; the maximum power of the 5L turbocharged engine is 110 kW and the maximum torque is 210 N·m, which is matched with a 6-speed manual or 6-speed automatic transmission.
2. Yes. Kia Ford is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
3. The turbocharged engine is actually more suitable for driving on city roads, which can output the maximum torque at very low speeds. However, the maintenance cost of the naturally aspirated engine is lower, and the reliability and durability of this engine are also better.
4. The original oil label of Kia Fredi is 5W40, and 10W40 can also be used, mainly depends on the environment of the owner. If the temperature is below -25°C, it is recommended to use 5W40 model oil. Self-priming engines do not have high requirements for oil. Mineral oil and semi-synthetic oil can be used. If you have a large budget, you can use fully synthetic oil.
5. I agree that turbocharging is conducive to improving combustion quality, reducing emissions and improving engine power! However, because the turbocharger and the engine are two power machines of different nature, they are connected by in and out, attention should be paid to the mutual influence of their respective properties and the impact of the matching on the performance of the whole machine.
6. Geely Binyue is a very good small SUV. It is equipped with 0T and 4T power, and the overall performance is relatively smooth. The power performance is quite good. It should be noted that its speed can reach 190km/h.
Kia Fredi idling jitter shutdown, the reason for the engine jitter: the engine foot glue is aging or loose. The foot glue is the rubber block cushioned between the engine and the frame. Its function is to reduce the vibration and buffering of the engine during work, and to fix the engine.
The reason for stepping on the brake idling jitter and turning off the engine: the idling switch does not close fault analysis: when the idling contact is disconnected, the ECU determines the startThe machine is in a partial load state. At this time, the ECU determines the fuel injection volume and fuel injection time according to the air flow sensor and the crankshaft position and speed signal.
The reasons are as follows, which may be caused by too much carbon in the engine.
No idling speed may be due to the fact that the throttle valve is too dirty, causing the engine to have insufficient air intake and then turn off. Brother, is there anything wrong with the car inspection? I'm in the situation now. It takes too long to start the car with one click. Gear D waits for the traffic light, and the engine shakes twice and the engine turns off.
Shaking when idling in the morning. The hot car has improved. Phenomenon: When the car is launched in the morning, the engine shakes more than normal, and sometimes there will be a problem of not being able to start. Reason: It is possible that the throttle valve is too dirty, and there is too much carbon accumulation in the fuel injector and intake duct.
Binance wallet-APP, download it now, new users will receive a novice gift pack.
1. The engine of Furidi is a domestic engine. The Furidi, which participated in the C-NCAP test, was officially launched in June 2009. The Furidi is equipped with front dual airbags and ISOFXI devices. The front seat belts have pre-tightening and force-limiting functions, and the driver's seat is equipped with Fully equipped with a reminder device.
2. It is not considered imported. It's 6Y shackles. It is much more powerful than the ordinary 6 naturally aspirated. It also saves fuel.
3. Kia FordDi is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
4. Hello, this is a domestic engine. I wish you a pleasant drive.
1. Fredi provides two engine options. Among them, the maximum power of the 5L naturally aspirated engine is 82 kW, and the maximum torque is 148 N·m, which is matched with a 5-speed manual or 4-speed automatic transmission; the maximum power of the 5L turbocharged engine is 110 kW and the maximum torque is 210 N·m, which is matched with a 6-speed manual or 6-speed automatic transmission.
2. Yes. Kia Ford is a vehicle manufacturer from South Korea. Its engines are also made in South Korea. Most of Kia's vehicles use naturally aspirated engines, but some use turbocharged engines.
3. The turbocharged engine is actually more suitable for driving on city roads, which can output the maximum torque at very low speeds. However, the maintenance cost of the naturally aspirated engine is lower, and the reliability and durability of this engine are also better.
4. The original oil label of Kia Fredi is 5W40, and 10W40 can also be used, mainly depends on the environment of the owner. If the temperature is below -25°C, it is recommended to use 5W40 model oil. Self-priming engines do not have high requirements for oil. Mineral oil and semi-synthetic oil can be used. If you have a large budget, you can use fully synthetic oil.
5. I agree that turbocharging is conducive to improving combustion quality, reducing emissions and improving engine power! However, because the turbocharger and the engine are two power machines of different nature, they are connected by in and out, attention should be paid to the mutual influence of their respective properties and the impact of the matching on the performance of the whole machine.
6. Geely Binyue is a very good small SUV. It is equipped with 0T and 4T power, and the overall performance is relatively smooth. The power performance is quite good. It should be noted that its speed can reach 190km/h.
Kia Fredi idling jitter shutdown, the reason for the engine jitter: the engine foot glue is aging or loose. The foot glue is the rubber block cushioned between the engine and the frame. Its function is to reduce the vibration and buffering of the engine during work, and to fix the engine.
The reason for stepping on the brake idling jitter and turning off the engine: the idling switch does not close fault analysis: when the idling contact is disconnected, the ECU determines the startThe machine is in a partial load state. At this time, the ECU determines the fuel injection volume and fuel injection time according to the air flow sensor and the crankshaft position and speed signal.
The reasons are as follows, which may be caused by too much carbon in the engine.
No idling speed may be due to the fact that the throttle valve is too dirty, causing the engine to have insufficient air intake and then turn off. Brother, is there anything wrong with the car inspection? I'm in the situation now. It takes too long to start the car with one click. Gear D waits for the traffic light, and the engine shakes twice and the engine turns off.
Shaking when idling in the morning. The hot car has improved. Phenomenon: When the car is launched in the morning, the engine shakes more than normal, and sometimes there will be a problem of not being able to start. Reason: It is possible that the throttle valve is too dirty, and there is too much carbon accumulation in the fuel injector and intake duct.
523.41MB
Check343.36MB
Check815.79MB
Check694.52MB
Check596.36MB
Check175.13MB
Check876.46MB
Check621.99MB
Check567.89MB
Check228.86MB
Check849.67MB
Check672.85MB
Check611.25MB
Check238.42MB
Check265.86MB
Check235.79MB
Check538.13MB
Check574.68MB
Check774.48MB
Check465.27MB
Check359.26MB
Check768.53MB
Check436.87MB
Check533.85MB
Check451.88MB
Check683.12MB
Check827.38MB
Check192.77MB
Check843.15MB
Check686.56MB
Check976.56MB
Check627.23MB
Check689.88MB
Check989.69MB
Check933.64MB
Check468.21MB
CheckScan to install
Binance wallet to discover more
Netizen comments More
2734 流水高山网
2025-01-23 06:59 recommend
222 呼吸相通网
2025-01-23 06:44 recommend
2139 博弈犹贤网
2025-01-23 06:38 recommend
431 不破不立网
2025-01-23 05:58 recommend
240 厚德载物网
2025-01-23 05:21 recommend